Project Overview

RAPID PROTOS (RPS) manufactured a custom CNC machined stainless steel split clamping collar bracket for industrial automation and precision shaft-mounting applications.

Made from AISI 416 stainless steel, the component features a split clamping section, a precision-bored central shaft hole, an integrated mounting base, and a curved locating surface.

The main manufacturing challenge was maintaining bore accuracy after cutting the clamping slot while preserving sufficient flexibility for secure shaft installation.

1. Key Specifications

Parameter Technical Details
Product Name CNC Machined Split Clamping Collar Bracket
Material AISI 416 Stainless Steel
Manufacturing Process CNC Milling, Precision Boring, Slotting
Component Dimensions Approx. 75 × 75 × 25 mm
Central Bore Diameter Ø40 mm
Bore Diameter Tolerance ±0.02 mm
Bore Cylindricity ≤0.01 mm
Split Slot Tolerance ±0.03 mm
Clamping Wall Thickness 4.0 mm
Mounting Base Thickness 5.0 mm
Surface Finish Precision Machined, Polished and Passivated
Application Industrial Shaft Clamping and Automation Fixtures
Lead Time 3 Working Days

2. Client Requirements

The bracket was designed to provide accurate shaft positioning and secure clamping without relying on a set screw pressing directly against the shaft surface.

Key requirements included:

  • Accurate Shaft Fit: Maintain the Ø40 mm clamping bore within ±0.02 mm.
  • Secure Clamping: Allow controlled elastic deformation of the split collar during bolt tightening.
  • Stable Mounting: Provide accurately machined mounting and locating surfaces.
  • Burr-Free Contact: Prevent sharp edges from scratching the mating shaft during installation or adjustment.

3. Manufacturing Challenges

Bore Distortion After Slotting

Cutting the split slot releases residual stresses and changes the stiffness of the collar, potentially affecting bore roundness and dimensional accuracy.

Stress Concentration at the Split

The narrow clamping section experiences repeated loading during tightening and loosening. Sharp internal corners can increase the risk of cracking.

Asymmetrical Workholding

The bracket combines a relatively thick mounting base with a thinner clamping section. Excessive clamping pressure during machining can distort the precision bore.

4. RPS Manufacturing Solutions

Staged Milling and Precision Boring

RPS rough-machined the bracket and central bore before cutting the split slot. Final boring was performed after slotting to improve dimensional consistency in the finished clamping geometry.

Controlled Slot Machining

Precision slotting tools and controlled cutting parameters were used to produce a consistent split width and minimize burr formation.

Custom Soft-Jaw Fixturing

Machining fixtures supported the rigid mounting base while minimizing pressure on the flexible collar section during final boring.

Deburring and Passivation

The bore edges, mounting holes, and split-slot edges were carefully deburred. The finished bracket received polishing and passivation to improve surface cleanliness and corrosion resistance.

5. Quality Inspection

Quality control focused on the features affecting shaft fit and clamping performance:

  • Bore Inspection: Diameter, roundness, and cylindricity of the Ø40 mm shaft hole.
  • CMM Inspection: Mounting hole locations and locating surface geometry.
  • Slot Inspection: Split width, edge condition, and dimensional consistency.
  • Assembly Verification: Fit with the specified mating shaft and clamping hardware.

6. Custom CNC Machined Clamping Components

Need precision CNC machined stainless steel shaft collars, split clamping brackets, or custom industrial fixture components?

RAPID PROTOS (RPS) provides CNC milling, precision boring, slot machining, and surface finishing for custom metal parts.

Send Your STEP Files and 2D Drawings for a Manufacturing Review & Quote →

CNC_Machining_Workshop_800x600-2

Rapid Protos

20+ years of professional one-stop custom parts manufacturer. No minimum order quantity, free quotation.

Leave A Comment